// product-data.jsx — All 6 product page contents (SEO-enhanced). // Looked up by window.__PRODUCT_SLUG in product-page.jsx. // Photos and SVG art are referenced by key — art comes from product-art.jsx, photos from LONETTI_PHOTOS. const PRODUCT_DATA = { /* ────────────────────────── PROVER TANKS ────────────────────────── */ "prover-tanks": { slug: "prover-tanks", nav: 1, art: "tank", title: "Prover Tanks for Liquid Flow Meter Calibration | Lonetti", metaDescription: "Lonetti manufactures 304 SS prover tanks from 50L to 5,000L+ for flow meter calibration, custody transfer, and fiscal measurement. Built to API MPMS Ch. 4.4 & OIML R117.", h1: "Custom stainless steel prover tanks.", h1Plain: "Custom Stainless Steel Prover Tanks", eyebrow: "Product · 01 of 06", lede: "Volumetric reference vessels from 50L to 5,000L+, built in 304 SS to OIML R117 and API MPMS Ch. 4.4 — certified by INTI, shipped to 47 countries.", quickSpecs: [ ["Capacity", "50L – 5,000L+"], ["Accuracy", "±0.05%"], ["Material", "304 SS"], ["Lead time", "8–14 wks"], ], heroPhoto: "proverTank", heroCallouts: [ { pos: { top: "14%", right: "-10px" }, label: "Sight glass" }, { pos: { top: "50%", left: "-10px" }, label: "304 SS body" }, { pos: { bottom: "14%", right: "-10px" }, label: "Drain valve" }, ], overviewKicker: "What it is, who uses it", overviewParas: [ "A Lonetti prover tank is a precision-calibrated stainless steel vessel used to verify the accuracy of liquid flow meters. A known volume of liquid passes through the meter under test and is collected in the prover tank — if the meter reading matches the tank's certified volume, the meter is accurate.", "Lonetti has manufactured prover tanks in Buenos Aires since 1960. Today they serve at petroleum terminals, refineries, pipeline takeoffs, and national metrology institutes across 47 countries — most often in custody-transfer applications where measurement accuracy is legally required.", "Every tank is built to customer specification. Capacity, geometry, valve configuration, and mounting are determined by the application: flow rate, fluid properties, accuracy class, and applicable standards. Standard configurations ship in 8–14 weeks.", ], features: [ { n: "01", title: "±0.05% accuracy", body: "Volumetric accuracy of ±0.05% or better. Calibrated by INTI, traceable to international metrology standards." }, { n: "02", title: "304 / 316 stainless steel", body: "Standard construction in 304 SS. 316 SS or specialty alloys available for aggressive media." }, { n: "03", title: "OIML R117 & API MPMS 4.4", body: "Designed and manufactured to OIML R117, API MPMS Chapter 4.4, and NIST Handbook 105-3." }, { n: "04", title: "50L to 5,000L+ capacity", body: "Manufactured from 50 liters to well over 5,000 liters. Larger configurations available on request." }, { n: "05", title: "Stationary, skid, or trailer", body: "Fixed, skid-mounted, or trailer-mounted configurations to suit field, terminal, or workshop deployment." }, { n: "06", title: "Sight glass & scale options", body: "High-resolution sight glasses with engraved scales, optional digital level transmitters." }, ], specs: [ ["Capacity range", "50 L – 5,000 L+ (custom on request)"], ["Body material", "AISI 304 stainless steel (standard); 316 SS, duplex available"], ["Volumetric accuracy", "±0.05% of reading or better"], ["Top section", "Conical with neck and graduated sight glass"], ["Bottom drain", "Stainless ball or butterfly valve, full-port"], ["Mounting", "Stationary · skid-mounted · trailer-mounted"], ["Standards", "OIML R117 · API MPMS Ch. 4.4 · NIST Handbook 105-3"], ["Certification", "INTI calibration certificate (traceable, OIML compliant)"], ["Lead time", "8 – 14 weeks (standard); 16 – 24 weeks (large custom)"], ["Shipping", "Crated for international freight; CoO, datasheets, calibration cert included"], ], applications: [ { title: "Custody transfer", body: "Calibrate fiscal flow meters at refineries, marine terminals, and pipeline takeoffs." }, { title: "Meter proving", body: "On-site or workshop verification of positive-displacement and turbine meters." }, { title: "Dispenser calibration", body: "Truck-loading rack and dispenser verification under regulatory audit." }, { title: "Pipe prover waterdraw", body: "Base volume determination of pipe provers via certified water draw." }, ], gallery: [ { tag: "WORKSHOP", caption: "1,000L prover assembly · Buenos Aires", photoKey: "proverTank_workshop" }, { tag: "DETAIL", caption: "Stainless detail · top section", photoKey: "proverTank_detail" }, { tag: "INTERIOR", caption: "Microblasted interior surface", photoKey: "proverTank_blue" }, { tag: "DEPLOYED", caption: "Multiple tanks · refinery installation", photoKey: "proverTank_install" }, { tag: "SHIPPING", caption: "Crated for international freight", photoKey: "proverTank_shipping" }, { tag: "FIELD", caption: "Outdoor facility deployment", photoKey: "proverTank_outdoor" }, ], faq: [ { q: "What is a prover tank and how does it work?", a: "A prover tank is a precision-calibrated stainless steel vessel used to verify the accuracy of liquid flow meters. A known volume of liquid is passed through the meter and collected in the prover tank; if the meter reading matches the tank's certified volume, the meter is accurate. Lonetti manufactures prover tanks from 50L to over 5,000L, certified to OIML R117 and API MPMS Chapter 4.4." }, { q: "What accuracy do Lonetti prover tanks achieve?", a: "Lonetti prover tanks achieve a volumetric accuracy of ±0.05% or better. All units are calibrated by Argentina's National Institute of Industrial Technology (INTI) and are traceable to national and international metrology standards (OIML, NIST, INMETRO)." }, { q: "Can Lonetti manufacture custom-sized prover tanks?", a: "Yes. Every Lonetti prover tank is built to customer specifications — any capacity from 50 liters to well over 5,000 liters, in stationary, skid-mounted, or trailer-mounted configurations." }, { q: "How long does it take to manufacture a custom prover tank?", a: "Standard configurations typically ship in 8–14 weeks. Large or highly customized systems may require 16–24 weeks. Contact us for a specific project timeline." }, ], related: ["test-measures", "water-draw-systems", "calibration-test-benches"], ctaTitle: "Need a custom prover tank? Talk to our engineers.", }, /* ────────────────────────── TEST MEASURES ────────────────────────── */ "test-measures": { slug: "test-measures", nav: 2, art: "measure", title: "Test Measures for Liquid Calibration | Lonetti", metaDescription: "Handheld 304 SS test measures from 1L to 50L for field and lab liquid calibration. OIML-certified. Custom volumes available. Used by petroleum, water, and chemical industries.", h1: "Precision test measures & calibration cans.", h1Plain: "Precision Test Measures & Calibration Cans", eyebrow: "Product · 02 of 06", lede: "Handheld volumetric reference cans from 1L to 50L — for verifying fuel dispensers, retail pumps, and small meters in the field. Built in 304 SS to OIML R120, INTI-certified.", quickSpecs: [ ["Capacity", "1L – 50L"], ["Accuracy", "±0.025%"], ["Material", "304 SS"], ["Standard", "OIML R120"], ], heroPhoto: "testMeasure_polished", heroCallouts: [ { pos: { top: "14%", right: "-10px" }, label: "Pour spout" }, { pos: { top: "44%", left: "-10px" }, label: "Sight gauge" }, { pos: { bottom: "14%", right: "-10px" }, label: "Drain valve" }, ], overviewKicker: "What it is, who uses it", overviewParas: [ "A Lonetti test measure is a handheld volumetric reference can used to verify the accuracy of fuel dispensers, retail pumps, and small flow meters in the field. A measured volume of liquid is drawn from the meter into the test measure — if the meter reading matches the measure's certified volume, the meter is accurate.", "Test measures are the inspector's standard tool. Lonetti's are in service at petroleum retailers, weights & measures inspectors, refueling operations, and metrology institutes across 47 countries — built in 304 stainless steel, with handle and pour spout for one-person operation.", "Every unit is built to specification: capacity from 1 liter to 50 liters, in liters or US gallons, with optional bottom drain, top funnel, or pressurized configuration. Standard cans ship in 4–8 weeks.", ], features: [ { n: "01", title: "±0.025% accuracy class", body: "OIML R120 class 0.05 / 0.025 accuracy — suitable for retail and inspector use." }, { n: "02", title: "1L to 50L capacity", body: "Standard sizes: 1, 2, 5, 10, 20, 25, 50 liters. Imperial units (gallons) available." }, { n: "03", title: "Single-piece 304 SS construction", body: "Welded stainless body, hand-polished, traceable to material certificate." }, { n: "04", title: "Graduated sight gauge", body: "Glass sight column with engraved meniscus scale — typically ±5mL resolution on 20L." }, { n: "05", title: "Reinforced handle & spout", body: "Designed for one-person field use. Optional second handle for capacities above 20L." }, { n: "06", title: "INTI certificate included", body: "Each unit ships with an INTI calibration certificate traceable to OIML R120 standards." }, ], specs: [ ["Capacity range", "1 L – 50 L (1, 2, 5, 10, 20, 25, 50 L standard)"], ["Body material", "AISI 304 stainless steel"], ["Volumetric accuracy", "OIML R120 class 0.05 / 0.025"], ["Construction", "Welded stainless body, hand-polished"], ["Sight gauge", "Borosilicate glass with engraved scale"], ["Handle", "Reinforced stainless; second handle ≥20L"], ["Bottom drain", "Optional — ball valve, full-port"], ["Standards", "OIML R120 · NIST Handbook 105-4"], ["Certification", "INTI calibration certificate (traceable)"], ["Lead time", "4 – 8 weeks"], ], applications: [ { title: "Retail dispenser verification", body: "Verifying fuel pumps at gas stations under weights & measures audit." }, { title: "Field meter inspection", body: "Spot-checking turbine and PD meters during routine compliance visits." }, { title: "Refueling operations", body: "Aviation, marine, and bulk-fuel delivery accuracy verification." }, { title: "Laboratory reference", body: "Bench-scale calibration of smaller flow instruments in calibration labs." }, ], gallery: [ { tag: "20L", caption: "20-liter test measure · handheld", photoKey: "testMeasure_20L" }, { tag: "10L", caption: "10-liter polished stainless can", photoKey: "testMeasure_10L" }, { tag: "DETAIL", caption: "Top funnel & pour spout detail", photoKey: "testMeasure_funnelLg" }, { tag: "ANGLED", caption: "Test measure with sight glass column", photoKey: "testMeasure_angled" }, { tag: "POLISHED", caption: "Polished prover measure finish", photoKey: "testMeasure_polished" }, { tag: "DETAIL", caption: "Funnel detail · stainless construction", photoKey: "testMeasure_funnel" }, ], faq: [ { q: "What is a test measure?", a: "A test measure is a handheld, certified volumetric can used to verify the accuracy of fuel dispensers and small flow meters in the field. A measured volume is dispensed from the meter under test and collected in the can; if the meter reading matches the can's certified volume, the meter is accurate." }, { q: "What is the difference between a prover tank and a test measure?", a: "A prover tank is a large, usually stationary or trailer-mounted vessel used to calibrate industrial flow meters and bulk delivery systems. A test measure is a smaller, portable handheld can (1L–50L) used in field or retail settings to verify the accuracy of fuel dispensers and smaller meters." }, { q: "What accuracy class do Lonetti test measures meet?", a: "Lonetti test measures meet OIML R120 accuracy classes 0.05 and 0.025, depending on capacity. Each unit ships with an INTI calibration certificate traceable to international metrology standards." }, { q: "Are custom volumes available?", a: "Yes. Standard sizes are 1, 2, 5, 10, 20, 25, and 50 liters, but custom capacities and imperial-gallon sizes can be built to specification. Lead time is 4–8 weeks." }, ], related: ["prover-tanks", "calibration-test-benches", "minilab"], ctaTitle: "Need a set of certified test measures? Get a quote.", }, /* ────────────────────────── WATER DRAW SYSTEMS ────────────────────────── */ "water-draw-systems": { slug: "water-draw-systems", nav: 3, art: "water", title: "Water Draw Calibration Systems | Lonetti", metaDescription: "Lonetti designs and manufactures water draw calibration systems for pipe prover verification. Traceable to national standards. Custom configurations for any prover diameter.", h1: "Waterdraw pipe prover calibration systems.", h1Plain: "Waterdraw Pipe Prover Calibration Systems", eyebrow: "Product · 03 of 06", lede: "Complete water draw systems for pipe prover base-volume determination — including reference vessels, pump skid, valving, and instrumentation. Traceable to OIML, API, and NIST standards.", quickSpecs: [ ["Method", "Volumetric / gravimetric"], ["Accuracy", "±0.02%"], ["Components", "Skid + vessels + pump"], ["Standards", "API MPMS 4.9"], ], heroPhoto: "waterDraw", heroCallouts: [ { pos: { top: "18%", left: "-10px" }, label: "Reference vessel" }, { pos: { top: "50%", right: "-10px" }, label: "Detector valving" }, { pos: { bottom: "18%", left: "-10px" }, label: "Pump skid" }, ], overviewKicker: "Pipe prover base-volume determination", overviewParas: [ "A water draw is the procedure for determining the base volume of a pipe prover (also called a small-volume prover or unidirectional prover). Water is drawn through the prover between detector switches and collected in certified volumetric reference vessels — the prover's true volume is computed from that draw.", "Lonetti designs complete water draw systems: certified reference vessels (typically 1,000L–5,000L prover tanks), pump skid, valving, detectors, temperature compensation, and the supporting documentation required by API MPMS Ch. 4.9 and OIML R117.", "Every system is engineered for the specific pipe prover: diameter, pressure rating, expected base volume, and on-site geometry. Configurations include trailer-mounted, skid-mounted, and permanent installations.", ], features: [ { n: "01", title: "Both methods supported", body: "Volumetric water draw (per API MPMS 4.9.2) and gravimetric (4.9.3) procedures, in one system." }, { n: "02", title: "Engineered as a system", body: "Reference vessels, pump, valving, temperature probes, and instrumentation are matched to your prover's geometry." }, { n: "03", title: "±0.02% uncertainty", body: "Total system uncertainty as low as ±0.02% with class-0.025 reference vessels and ITS-90 temperature compensation." }, { n: "04", title: "Field-mobile configuration", body: "Trailer or skid mounting available — bring traceable calibration to the prover, not the other way around." }, { n: "05", title: "Full documentation kit", body: "Procedure documents, calibration certificates, and the math worksheet template required by API." }, { n: "06", title: "Detector switch interface", body: "4–20 mA / volt-free contact interfaces to existing pipe prover detector instrumentation." }, ], specs: [ ["Method", "Volumetric (API MPMS 4.9.2) · Gravimetric (4.9.3)"], ["Reference vessels", "Lonetti 304 SS prover tanks, ±0.025% class"], ["Vessel sizing", "Typically 1,000 L – 5,000 L (matched to prover base volume)"], ["Pump", "Variable-speed, low-pulsation centrifugal or PD"], ["Valving", "Full-port ball valves with detector interlocks"], ["Temperature", "PT100 RTDs on prover and reference vessel, ITS-90 compensation"], ["Detector interface", "4–20 mA · volt-free contact · 24 VDC compatible"], ["System uncertainty", "±0.02% – ±0.05% (depending on configuration)"], ["Standards", "API MPMS Ch. 4.9 · OIML R117"], ["Mounting", "Trailer · skid · permanent installation"], ], applications: [ { title: "Pipe prover commissioning", body: "Initial base-volume determination on new unidirectional or bidirectional pipe provers." }, { title: "Periodic recalibration", body: "5-year recalibrations required by API MPMS and many regulatory regimes." }, { title: "Custody transfer audit", body: "Independent verification of base volumes for fiscal metering audit trails." }, { title: "Reference traceability", body: "Establishing field-to-lab traceability for petroleum measurement systems." }, ], gallery: [ { tag: "WORKSHOP", caption: "Water draw vessel · workshop test", photoKey: "waterDraw_workshop" }, { tag: "GLASS", caption: "Glass sight column · meniscus reading", photoKey: "waterDraw_glass" }, { tag: "EQUIPMENT", caption: "Stainless water draw equipment", photoKey: "waterDraw" }, { tag: "SCHEMATIC", caption: "System schematic · technical drawing", photoKey: "waterDraw_drawing" }, { tag: "DETAIL", caption: "Reference vessel · sight gauge detail", photoKey: "proverTank_gauges" }, { tag: "DEPLOYED", caption: "Field-mounted reference vessels", photoKey: "proverTank_install" }, ], faq: [ { q: "What is a water draw calibration system?", a: "A water draw system is used to calibrate pipe provers — a long section of pipe through which liquid passes at a known flow rate. Water is drawn through the prover and collected in certified volumetric reference vessels to determine the prover's base volume. Lonetti manufactures complete waterdraw systems for both gravimetric and volumetric water draw procedures." }, { q: "Volumetric versus gravimetric water draw — which is better?", a: "Both are accepted by API MPMS Ch. 4.9. Volumetric is faster and uses certified reference vessels (Lonetti prover tanks). Gravimetric is slightly more accurate and uses a calibrated scale, but requires more setup. Lonetti systems can support both." }, { q: "What standards apply?", a: "API MPMS Chapter 4.9 (Calibration of Provers) and OIML R117 (Dynamic Measuring Systems for Liquids). Reference vessels are calibrated per OIML R117 and NIST Handbook 105-3." }, { q: "Can the system be trailer-mounted?", a: "Yes. We build trailer-mounted, skid-mounted, and permanent installations. Trailer-mounted systems are common for service providers who calibrate multiple pipe provers on rotation." }, ], related: ["prover-tanks", "calibration-test-benches", "tanker-truck-calibration-towers"], ctaTitle: "Calibrating a pipe prover? Spec a water draw system.", }, /* ────────────────────────── TANKER TRUCK TOWERS ────────────────────────── */ "tanker-truck-calibration-towers": { slug: "tanker-truck-calibration-towers", nav: 4, art: "tower", title: "Tanker Truck Calibration Towers | Lonetti", metaDescription: "Multi-tank calibration towers for tanker truck and cistern vehicle measurement verification. Custom-built configurations, up to 5,000L per tier. Serving petroleum fleet operators worldwide.", h1: "Tanker truck liquid calibration tower systems.", h1Plain: "Tanker Truck Liquid Calibration Tower Systems", eyebrow: "Product · 04 of 06 · Lonetti speciality", lede: "Multi-tier calibration tower systems for verifying tanker truck and cistern vehicle compartments. Custom-built tower frames with stacked Lonetti prover tanks. Available worldwide.", quickSpecs: [ ["Tiers", "2 – 5 tanks"], ["Per tier", "Up to 5,000L"], ["Footprint", "Permanent / portable"], ["Accuracy", "±0.05% per tank"], ], heroPhoto: "tankerTower_transport", heroCallouts: [ { pos: { top: "12%", right: "-10px" }, label: "Top tier · 5,000L" }, { pos: { top: "44%", left: "-10px" }, label: "Multi-stage drain" }, { pos: { bottom: "16%", right: "-10px" }, label: "Truck stand" }, ], overviewKicker: "Multi-compartment tanker verification", overviewParas: [ "Tanker trucks carry petroleum and chemical product across borders, refineries, and terminals — each compartment is a separately certified measure. Calibrating those compartments requires a vessel of equal volume, certified, and configured to allow controlled fill and drain.", "Lonetti's tanker truck calibration tower stacks multiple prover tanks in a structural tower frame: typically two to five tanks of 500–5,000L per tier, with a top platform for operator access. The truck drives under the tower; product is drawn into the tower tanks, totalled, and compared against the truck's compartment indication.", "This is a Lonetti specialty product — built to customer specification, installed permanently at terminals and refineries, or as a portable configuration for fleet calibration service providers. Every project is engineered around the truck fleet's compartment sizes and the available footprint.", ], features: [ { n: "01", title: "Configurable tier count", body: "Two, three, four, or five tiers — matched to the largest tanker compartment in your fleet." }, { n: "02", title: "Stainless or steel frame", body: "Hot-dip galvanized steel tower frame standard; full stainless on request for aggressive media." }, { n: "03", title: "Per-tier ±0.05%", body: "Each prover tank in the tower is INTI-certified to ±0.05% — totalled volume traceable to international standards." }, { n: "04", title: "Operator platform & ladders", body: "OSHA-compliant access platform, sight glass for each tier, safety rails." }, { n: "05", title: "Permanent or portable", body: "Permanent install at terminals, or skid/trailer-mounted for mobile fleet calibration service." }, { n: "06", title: "Lonetti specialty product", body: "We have built these for terminals across South America, Africa, and the Middle East since the 1980s." }, ], specs: [ ["Tier count", "2 – 5 (custom)"], ["Per-tier capacity", "500 L – 5,000 L (typically 5,000 L top, smaller below)"], ["Tank material", "AISI 304 stainless steel (standard); 316 SS available"], ["Frame material", "Hot-dip galvanized steel (standard); stainless on request"], ["Per-tank accuracy", "±0.05% (INTI certified, OIML R117)"], ["Access", "Stair tower with platform, rails, fall protection"], ["Drainage", "Independent drain per tier; common collection manifold optional"], ["Truck clearance", "Specified per fleet — typically 3.5 – 4.5 m"], ["Installation", "Permanent (foundation) or skid/trailer"], ["Lead time", "20 – 32 weeks (project-dependent)"], ], applications: [ { title: "Terminal fleet calibration", body: "Permanent installation at petroleum terminals, refineries, and bulk-distribution depots." }, { title: "Service-provider use", body: "Portable configurations for calibration service companies serving multi-site fleets." }, { title: "Periodic recertification", body: "Annual / biennial recertification of tanker compartments as required by national regulators." }, { title: "New-build commissioning", body: "Initial certification of newly fabricated tanker truck compartments before commissioning." }, ], gallery: [ { tag: "TRANSPORT", caption: "Portable tower under transport", photoKey: "tankerTower_transport" }, { tag: "DEPLOYED", caption: "Permanent installation · refinery", photoKey: "tankerTower" }, { tag: "FIELD", caption: "Tanker truck approaching tower", photoKey: "tankerTower_white" }, { tag: "NIGHT", caption: "Night operation · 24/7 deployment", photoKey: "tankerTower_night" }, { tag: "TERMINAL", caption: "Multi-compartment truck · gas terminal", photoKey: "tankerTower_station" }, { tag: "EQUIPMENT", caption: "Tower-related transport · trailer", photoKey: "measurement-equipment-on-trailer" }, ], faq: [ { q: "What is a tanker truck calibration tower?", a: "It is a multi-tier installation of certified prover tanks, stacked in a structural tower, used to verify the volume of each compartment of a tanker truck or cistern vehicle. The truck drives under the tower, product is transferred into the tower tanks, and the totalled volume is compared against the truck's compartment indication." }, { q: "How accurate is the total measurement?", a: "Each Lonetti prover tank in the tower is certified to ±0.05% by INTI. The combined system accuracy depends on configuration, but is typically ±0.05% – ±0.1% across the full tanker capacity." }, { q: "Is this a portable or permanent installation?", a: "Both are available. Most clients order a permanent install at a refinery or terminal, but skid- and trailer-mounted configurations are built for calibration service providers serving multi-site fleets." }, { q: "What is the lead time?", a: "Tanker truck calibration towers are custom projects — 20 to 32 weeks depending on configuration, foundation requirements, and certification scope. Contact our engineering team early in your project schedule." }, ], related: ["prover-tanks", "water-draw-systems", "minilab"], ctaTitle: "Calibrating a tanker fleet? Spec a tower with our engineers.", }, /* ────────────────────────── TEST BENCHES ────────────────────────── */ "calibration-test-benches": { slug: "calibration-test-benches", nav: 5, art: "bench", title: "Calibration Test Benches for Liquid Meters | Lonetti", metaDescription: "Fixed and mobile calibration test benches for flow meter verification in laboratories, workshops, and field environments. Designed to your exact specifications.", h1: "Custom liquid calibration test benches.", h1Plain: "Custom Liquid Calibration Test Benches", eyebrow: "Product · 05 of 06", lede: "Fixed and mobile test benches for meter verification — flow loop, reference standard, control panel, and instrumentation engineered around your meter portfolio. Built to spec.", quickSpecs: [ ["Flow", "Up to 1,200 L/min"], ["Reference", "Prover or master meter"], ["Accuracy", "±0.05%"], ["Setup", "Fixed / mobile"], ], heroPhoto: "testBench", heroCallouts: [ { pos: { top: "16%", right: "-10px" }, label: "Control panel" }, { pos: { top: "50%", left: "-10px" }, label: "Reference standard" }, { pos: { bottom: "16%", right: "-10px" }, label: "Flow loop" }, ], overviewKicker: "Workshop & laboratory meter verification", overviewParas: [ "A Lonetti calibration test bench is a complete closed-loop test rig for verifying liquid flow meters — turbine, positive-displacement, electromagnetic, and Coriolis. The meter under test is plumbed into the loop; product flows from a reservoir, through the meter, into a certified reference (a prover tank or master meter), and back to the reservoir.", "Each bench is engineered for the meter portfolio of the client: flow range, pipe sizes, end connections, accuracy class, and supported meter types. Common configurations support sizes from DN15 to DN100 and flows from 5 L/min to 1,200 L/min — but we have built benches for both smaller (fuel dispenser) and larger (terminal loading) ranges.", "Benches ship with a documented procedure, calibration certificates for all reference standards, and the control panel necessary to run the loop unattended. Fixed and mobile configurations both supported.", ], features: [ { n: "01", title: "Closed-loop flow", body: "Variable-speed pump, surge tank, return line — full flow recirculation, no waste of product." }, { n: "02", title: "Reference choice", body: "Lonetti prover tank (gravimetric reference) or certified master meter (faster, suited for production). Both supported." }, { n: "03", title: "DN15 – DN100 standard", body: "Standard pipe sizes from DN15 to DN100 (½″ – 4″). Larger sizes engineered on request." }, { n: "04", title: "Multi-meter support", body: "Turbine, PD, electromagnetic, ultrasonic, and Coriolis meters — same bench, with adapter spools." }, { n: "05", title: "Control & instrumentation", body: "PLC-based control panel with HMI, RTDs, pressure transducers, and data-logging output." }, { n: "06", title: "Fixed or mobile", body: "Workshop installation or container-mounted mobile configuration for field meter shops." }, ], specs: [ ["Flow range", "5 L/min – 1,200 L/min (custom on request)"], ["Pipe sizes", "DN15 – DN100 standard (½″ – 4″); larger on spec"], ["Reference standard", "Lonetti prover tank · master meter · both"], ["Reference accuracy", "±0.05% – ±0.02% (configuration-dependent)"], ["Pump", "Variable-speed centrifugal or positive-displacement"], ["Reservoir", "200 L – 2,000 L (matched to flow range)"], ["Control", "PLC with HMI; data export via Modbus, OPC, or CSV"], ["Instrumentation", "PT100 RTDs, pressure transducers, density (optional)"], ["Standards", "OIML R117 · ISO 4185 · API MPMS"], ["Configuration", "Fixed workshop install · skid-mounted · container-mobile"], ], applications: [ { title: "Meter shop workshop", body: "Permanent installation at a meter calibration workshop, verifying multiple sizes per day." }, { title: "OEM production test", body: "End-of-line test rig for meter manufacturers — every unit tested before shipment." }, { title: "Field meter shop", body: "Container-mounted mobile bench for service providers serving distributed sites." }, { title: "Lab reference", body: "Research or metrology institute reference bench — typically with multiple master meters." }, ], gallery: [ { tag: "WORKSHOP", caption: "Full test bench · workshop install", photoKey: "testBench" }, { tag: "SIDE", caption: "Side view · pipe layout", photoKey: "testBench_side" }, { tag: "DETAIL", caption: "Meter mounting detail", photoKey: "testBench_detail" }, { tag: "GAUGES", caption: "Instrumentation cluster · pressure & temp",photoKey: "testBench_gauges" }, { tag: "OVERVIEW", caption: "Overview · full flow loop", photoKey: "testBench_overview" }, { tag: "OPERATOR", caption: "Technician operating bench", photoKey: "testBench_tech" }, ], faq: [ { q: "What is a calibration test bench?", a: "A test bench is a complete closed-loop test rig for verifying liquid flow meters. The meter under test is plumbed into a flow loop; product flows through it and into a certified reference (prover tank or master meter). Bench output is a meter factor or correction curve." }, { q: "Prover or master meter reference?", a: "Prover tank (gravimetric) is the most accurate, traceable to OIML R117 directly. Master meter is faster and suited for production-line testing, but requires periodic recalibration against a prover. Many Lonetti benches include both." }, { q: "Can the bench be mobile?", a: "Yes. Container-mounted and trailer-mounted configurations are common for service providers. Mobile benches still include the reference, pump, reservoir, control panel, and instrumentation — just in a smaller footprint." }, { q: "Do you support electromagnetic and Coriolis meters?", a: "Yes. Lonetti benches handle turbine, PD, electromagnetic, ultrasonic, and Coriolis meters — adapter spools and the appropriate electrical interfaces are included." }, ], related: ["prover-tanks", "water-draw-systems", "minilab"], ctaTitle: "Specifying a test bench? Send us your meter portfolio.", }, /* ────────────────────────── MINILAB ────────────────────────── */ "minilab": { slug: "minilab", nav: 6, art: "lab", title: "MINILAB® Mobile Calibration Vans | Lonetti", metaDescription: "The Lonetti MINILAB® is a fully equipped mobile calibration laboratory built inside a van — bringing traceable liquid measurement and meter proving to any location.", h1: "MINILAB® — self-contained mobile calibration laboratories.", h1Plain: "MINILAB® — Self-Contained Mobile Calibration Laboratories", eyebrow: "Product · 06 of 06 · Lonetti speciality", lede: "A complete calibration laboratory built into a van. Reference vessels, master meters, pump skid, control instrumentation, and certification documentation — anywhere the customer needs it.", quickSpecs: [ ["Vehicle", "Van / box truck"], ["Onboard", "Prover + master meter"], ["Power", "Self-contained genset"], ["Accuracy", "±0.05% traceable"], ], heroPhoto: "minilab", heroCallouts: [ { pos: { top: "18%", right: "-10px" }, label: "Reference prover" }, { pos: { top: "50%", left: "-10px" }, label: "Pump & instrumentation" }, { pos: { bottom: "18%", right: "-10px" }, label: "Self-contained genset" }, ], overviewKicker: "Traceable calibration, anywhere", overviewParas: [ "The MINILAB® is a Lonetti proprietary product — a fully equipped liquid calibration laboratory built into a van or box truck. It travels to the meter, not the other way around. Self-contained: it carries its own reference prover, pump, control instrumentation, and power supply.", "MINILAB® is used by petroleum companies, national metrology institutes, and inspection bodies that need to perform traceable calibration at remote sites — pipeline takeoffs, offshore terminals, mining operations, agricultural depots — where the meters cannot be moved to a workshop.", "Each MINILAB® is configured to the client's meter portfolio: reference vessel size, master meter range, supported meter types, and the inspection documentation system. The van itself is selected for the operating geography — diesel, gasoline, 4WD, refrigerated, depending on the route.", ], features: [ { n: "01", title: "Self-contained operation", body: "Onboard genset, pump, reservoir, and instrumentation — no external power or water required." }, { n: "02", title: "Reference prover onboard", body: "Lonetti 200L–1,000L prover tank built into the van — INTI-certified, traceable." }, { n: "03", title: "Master meter included", body: "Faster verifications via certified master meter; cross-checked against the onboard prover." }, { n: "04", title: "All meter types supported", body: "Turbine, PD, electromagnetic, ultrasonic, Coriolis — adapter spools onboard." }, { n: "05", title: "Climate-controlled cabin", body: "Insulated and air-conditioned work area for hot or cold operating environments." }, { n: "06", title: "Complete documentation kit",body: "Onboard PC with calibration software, certificate templates, and audit-trail data export." }, ], specs: [ ["Vehicle", "Cargo van or box truck (client specifies make/model)"], ["Onboard prover", "200 L – 1,000 L Lonetti SS prover tank"], ["Onboard master meter","Coriolis or PD class 0.05, traceable"], ["Pump", "Variable-speed, 10 – 400 L/min"], ["Power", "Onboard diesel genset, 7 – 20 kVA"], ["Reservoir", "200 L – 800 L stainless"], ["Instrumentation", "PT100 RTDs, pressure transducers, density (option)"], ["Software", "Onboard PC with calibration & certificate generation"], ["Climate", "Insulated cabin with HVAC"], ["Lead time", "16 – 28 weeks (depends on vehicle availability)"], ], applications: [ { title: "Remote pipeline calibration", body: "Pipeline takeoff meters where the meter cannot be removed from service." }, { title: "Offshore & marine", body: "Loading-arm meters at marine terminals and offshore platforms." }, { title: "National metrology service", body: "INTI / INMETRO-style state inspector fleets serving regional weights & measures." }, { title: "Mining & agriculture", body: "Fuel and chemical metering at remote operations where workshops aren't an option." }, ], gallery: [ { tag: "EXTERIOR", caption: "MINILAB® · exterior view", photoKey: "minilab" }, { tag: "OPEN", caption: "Equipment bay open · field setup", photoKey: "minilab_open" }, { tag: "REAR", caption: "Rear-loading prover access", photoKey: "minilab_equip" }, { tag: "INTERIOR", caption: "Interior · instrumentation bay", photoKey: "minilab_interior" }, { tag: "TRAILER", caption: "Trailer-mounted variant", photoKey: "minilab_trailer" }, { tag: "EXPO", caption: "Lonetti at ADIPEC · Abu Dhabi", photoKey: "expoADIPEC" }, ], faq: [ { q: "What is the MINILAB®?", a: "MINILAB® is a Lonetti proprietary mobile calibration laboratory — a complete liquid calibration setup (reference prover, master meter, pump, instrumentation, power) built into a van or box truck. It enables traceable calibration at remote sites where meters cannot be removed from service." }, { q: "Is the MINILAB® traceable?", a: "Yes. The onboard reference vessel and master meter are INTI-calibrated and traceable to international standards (OIML R117, NIST). The MINILAB® itself ships with full calibration documentation." }, { q: "Can I specify the vehicle?", a: "Yes. Clients typically specify the chassis (make, model, fuel, drivetrain) based on their operating geography. Lonetti integrates the laboratory onto the vehicle of choice." }, { q: "What's the lead time?", a: "16 – 28 weeks, depending on vehicle availability and configuration complexity. Vehicle procurement can be the longest item on the critical path — talk to us early." }, ], related: ["prover-tanks", "calibration-test-benches", "tanker-truck-calibration-towers"], ctaTitle: "Need a MINILAB® for your fleet? Tell us your routes.", }, }; Object.assign(window, { PRODUCT_DATA });